AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Using ham radio deluxe with signalink usb11/10/2023 I use the internal sound card, but you will need to configure HRD to use the Signalink sound card. So on my laptop, I use two USB connections plus the audio input and audio output. My rig control interface (RS-232 to CIV) is also home brew. I use a home brew interface with my HP G62 laptop (Windows 7) and I use HRD. I have others, but that is the one I am using with my IC-735. One of the cables that I use is USB to RS232 Converter Cable 1.0 meter - UMC-201. Cheaper interface cables will drop the connection and cause problems. Be a little careful when purchasing this cable. If your computer does not have a RS-232 interface, you will need a USB to Serial Port Interface cable. I believe that is the IF-10c option for the TS-140S. It is also possible to go through the microphone connector, but that is not as efficient and for another discussion.įor rig control you will need to go in through your rigs RS-232 connector. That connector has all of the audio and PTT signals necessary. I believe on your TS-140S you would need to access the rear ACC2 connector. This interface handles the audio in/out from your rig. You can use DM 780 without being connected to the radio though.The Signalink USB requires a USB connection, because it is effectively a external sound blaster interface. Then as long as you are connected to your radio, everything will work, to include the log book. Once that is done click the "X" to close the options screen. Once there, ensure that the "Input and Output" is set to USB Audio Device for both Speaker and Microphone. Once DM780 Opens up click on the Options button, it is the symbol with the hand over a piece of paper, go to soundcard on the left of the options screen that opens up. Right Click on your speaker icon in the system tray at the bottom right of your screen near the clock, if you are using Windows.ĭigital modes are used in DM 780 portion of the HRD. Next, for the SignaLink USB make sure the computers sound card is set for USB Audio Device for both Microphone and Speakers. The "D" will show up on your radio not your HRD. I have an IC 746Pro, SignaLink USB and then I use a Radio Shack Full Speed USB Scanner Programming Cable from the back of the CL-V Remote Control Jack Input.įor Digimode I need to be in "D" Mode on the ICOM, hold the SSB button down for a second or two and a "D" will show up beside the LSB or USB on your screen. It is full of stuff I have no idea of what it is.
0 Comments
Read More
Leave a Reply. |